| PLUNGER TYPE LIQUIDS ENDS |
| Applications |
| Suitable for non hazardous liquids. |
| |
| Standard Type |
 |
• |
- Due to their simplicity they are quite economical.
|
• |
|
• |
They can be provided with latern ring flushing connections. |
• |
They have Low NPSHR requirement. |
• |
- They have high reliability.
|
|
| |
| Jacketed Heads |
| Can be provided in the case of molten liquids being pumped. |
 |
• |
- The jacket encloses the check valves and gland chamber.
|
• |
- The valves are cartridge type and can be removed for servicing without dismantling the suction and discharge Connections.
|
|
| |
| High Capavity Heads |
 |
For capacities greater than nine thousand Litres per Hour and having low discharge pressures, double acting type plunger pump heads can be provided. |
| |
| Remote Head Type |
 In case of handling liquids under extreme temperature conditions or in the case of explosive liquids, a remote head is provided which can be isolated by means of a physical barrier from the surrouding environment. This arrangement can be provided on Plunger & Diaphragm liquid ends. |
|
|
